![hyperterminal ubuntu hyperterminal ubuntu](https://tipsmake.com/data1/images/how-to-install-hyper-terminal-in-ubuntu-2004-picture-2-2nkms1nhw.jpg)
![hyperterminal ubuntu hyperterminal ubuntu](https://linuxways.net/wp-content/uploads/2021/06/Linux-Whereis-Command.jpg)
Hyperterminal ubuntu software#
Serial Port Monitor will help you resend the exact same data to the required COM port so that you can review the reaction of your serial software or device. In order to test whether the problem in your serial network is fixed, you can reproduce the communication between a COM port and a serial app or device. In case you need to save the session, choose ‘Session -> Save session/ Save session As’ on the main menu.
![hyperterminal ubuntu hyperterminal ubuntu](https://storungssuche.com/wp-content/uploads/2020/09/tutorials-9832-0-67665000-1600414769_thumb.png)
Also, you can start the monitoring session in new window by enabling the corresponding option.
![hyperterminal ubuntu hyperterminal ubuntu](https://miro.medium.com/max/1200/1*OeII470zeg9nOFRRmVxkIg.png)
Hyperterminal ubuntu install#
Download the app, install it on your computer and start it. Note: If you disable minicom gracefully, you will create several files lck* under/var/lock, which prevent the minicom from running, remove them and restore them.Here’s what you should do if you need to log and analyze the activity of your system’s serial interfaces. Note that the/DEV/TTYS0 corresponds to the port that the serial 0 connects you to the Development Board. The command minicom is entered into the serial console screen, while the MINICOM-S is configured minicom. The next time you enter Minicon you can enter directly. If the configuration name is empty, the default configuration is enabled. Run the sudo minicom configuration name to enable the configuration. There are two exit options: Exit, Exit MinicoĮxit: Exit the Configuration interface and enable the current configuration For example, if I save the config file as myconf, running "sudo minicom myconf" will enable the configuration. Set Save As: : Save the configuration file and enable the configuration file the next time you run sudo minicom configuration name. Save Settings to DFL: Save the configuration as the default configuration, and the next time you run the Sodu minicom command, the configuration is automatically enabled There are two save options: "Save settings to DFL" and "Save settings as. Set baud rate and frame format 115200 8N1 (115200 8n1:115200 to baud rate, 8 for frame data length 8,n for no parity bit, 1 for 1 bit stop bit)īecause the serial port on my Development Board does not use hardware flow control, set the hardware flow control to "no".Īfter setting, press ENTER to return to the main configuration interface Select Serial device: Under Linux, the COM0 port is/dev/ttys0,com1 port for/DEV/TTYS1, my serial cable is connected to COM1 port, so select/dev/ttys1 Select "Serial Port Settings" to enter the serial port configuration Interface Run the "sudo minicom-s" command into the Configuration interface (or run "sudo minicom", then press "Enter +a" at the same time, press z, and finally press O, also into the configuration interface)